|
通常情況下，為了達到節能環保的目的，我們購買了熱風爐之后，都要通過一系列的改造才正式將其投入使用。既然如此，對于熱風爐改造的一些知識點，我們也是十分有必要了解清楚了。從事熱風爐改造事業多年，對于熱風爐改造的經驗是非常豐富的。從實際情況中，我們可以將熱風爐改造的一些事項總結如下：
Usually, in order to achieve the goal of energy saving and environmental protection, we buy a hot blast stove, it must be formally put into use through a series of modifications. In this case, it is necessary for us to understand some knowledge points of hot stove transformation. He has been engaged in the transformation of hot stoves for many years, and has rich experience in the transformation of hot stoves. From the actual situation, we can summarize some items of hot stove transformation as follows:
一、一般熱風爐的使用壽命為30年之久，正常情況下基本上4年大修一次，每年度都必須有小修計劃，市場容量大。
1. The service life of general hot blast stoves is 30 years. Normally, they are overhauled once every four years. Every year, there must be a minor repair plan, which has a large market capacity.
二、如果熱風爐運行出現非正常情況或用戶有特殊要求，則需要對熱風爐進行改造。
2. If the hot blast stove runs abnormally or the users have special requirements, the hot blast stove needs to be reformed.
三、熱風爐改造不僅是熱風爐本體問題，還牽扯到熱風爐范圍內所有輔機、管道等配套設備問題。
3. The transformation of hot blast stove is not only a problem of the main body of hot blast stove, but also involves all auxiliary machines, pipes and other supporting equipment within the scope of hot blast stove.
四、熱風爐改造前，應該進行全面的分析，確定改造方案，然后再進行詳細計算與圖紙設計。
4. Before the transformation of hot blast stove, it is necessary to make a comprehensive analysis and determine the transformation plan, and then carry out detailed calculation and drawing design.
版權所有@轉載請注明：http://www.msail.net/showblog.asp?id=314
|
